CARGO-TREE(1) User Commands CARGO-TREE(1)

NAME

cargo-tree -- Display a tree visualization of a dependency graph

SYNOPSIS

cargo tree [options]

DESCRIPTION

This command will display a tree of dependencies to the terminal. An
example of a simple project that depends on the "rand" package:

myproject v0.1.0 (/myproject)
`-- rand v0.7.3
|-- getrandom v0.1.14
| |-- cfg-if v0.1.10
| `-- libc v0.2.68
|-- libc v0.2.68 (*)
|-- rand_chacha v0.2.2
| |-- ppv-lite86 v0.2.6
| `-- rand_core v0.5.1
| `-- getrandom v0.1.14 (*)
`-- rand_core v0.5.1 (*)
[build-dependencies]
`-- cc v1.0.50

Packages marked with (*) have been "de-duplicated". The dependencies
for the package have already been shown elsewhere in the graph, and
so are not repeated. Use the --no-dedupe option to repeat the
duplicates.

The -e flag can be used to select the dependency kinds to display.
The "features" kind changes the output to display the features
enabled by each dependency. For example, cargo tree -e features:

myproject v0.1.0 (/myproject)
`-- log feature "serde"
`-- log v0.4.8
|-- serde v1.0.106
`-- cfg-if feature "default"
`-- cfg-if v0.1.10

In this tree, myproject depends on log with the serde feature. log in
turn depends on cfg-if with "default" features. When using -e
features it can be helpful to use -i flag to show how the features
flow into a package. See the examples below for more detail.

Feature Unification

This command shows a graph much closer to a feature-unified graph
Cargo will build, rather than what you list in Cargo.toml. For
instance, if you specify the same dependency in both [dependencies]
and [dev-dependencies] but with different features on. This command
may merge all features and show a (*) on one of the dependency to
indicate the duplicate.

As a result, for a mostly equivalent overview of what cargo build
does, cargo tree -e normal,build is pretty close; for a mostly
equivalent overview of what cargo test does, cargo tree is pretty
close. However, it doesn't guarantee the exact equivalence to what
Cargo is going to build, since a compilation is complex and depends
on lots of different factors.

To learn more about feature unification, check out this dedicated
section
<https://doc.rust-lang.org/cargo/reference/features.html#feature-unification>.

OPTIONS

Tree Options

-i spec, --invert spec
Show the reverse dependencies for the given package. This flag
will invert the tree and display the packages that depend on the
given package.

Note that in a workspace, by default it will only display the
package's reverse dependencies inside the tree of the workspace
member in the current directory. The --workspace flag can be used
to extend it so that it will show the package's reverse
dependencies across the entire workspace. The -p flag can be used
to display the package's reverse dependencies only with the
subtree of the package given to -p.

--prune spec
Prune the given package from the display of the dependency tree.

--depth depth
Maximum display depth of the dependency tree. A depth of 1
displays the direct dependencies, for example.

--no-dedupe
Do not de-duplicate repeated dependencies. Usually, when a
package has already displayed its dependencies, further
occurrences will not re-display its dependencies, and will
include a (*) to indicate it has already been shown. This flag
will cause those duplicates to be repeated.

-d, --duplicates
Show only dependencies which come in multiple versions (implies
--invert). When used with the -p flag, only shows duplicates
within the subtree of the given package.

It can be beneficial for build times and executable sizes to
avoid building that same package multiple times. This flag can
help identify the offending packages. You can then investigate if
the package that depends on the duplicate with the older version
can be updated to the newer version so that only one instance is
built.

-e kinds, --edges kinds
The dependency kinds to display. Takes a comma separated list of
values:

+o all -- Show all edge kinds.

+o normal -- Show normal dependencies.

+o build -- Show build dependencies.

+o dev -- Show development dependencies.

+o features -- Show features enabled by each dependency. If this
is the only kind given, then it will automatically include
the other dependency kinds.

+o no-normal -- Do not include normal dependencies.

+o no-build -- Do not include build dependencies.

+o no-dev -- Do not include development dependencies.

+o no-proc-macro -- Do not include procedural macro dependencies.

The normal, build, dev, and all dependency kinds cannot be mixed
with no-normal, no-build, or no-dev dependency kinds.

The default is normal,build,dev.

--target triple
Filter dependencies matching the given target triple
<https://doc.rust-lang.org/cargo/appendix/glossary.html#target>.
The default is the host platform. Use the value all to include
all targets.

Tree Formatting Options

--charset charset
Chooses the character set to use for the tree. Valid values are
"utf8" or "ascii". When unspecified, cargo will auto-select a
value.

-f format, --format format
Set the format string for each package. The default is "{p}".

This is an arbitrary string which will be used to display each
package. The following strings will be replaced with the
corresponding value:

+o {p} -- The package name.

+o {l} -- The package license.

+o {r} -- The package repository URL.

+o {f} -- Comma-separated list of package features that are
enabled.

+o {lib} -- The name, as used in a use statement, of the
package's library.

--prefix prefix
Sets how each line is displayed. The prefix value can be one of:

+o indent (default) -- Shows each line indented as a tree.

+o depth -- Show as a list, with the numeric depth printed before
each entry.

+o none -- Show as a flat list.

Package Selection

By default, when no package selection options are given, the packages
selected depend on the selected manifest file (based on the current
working directory if --manifest-path is not given). If the manifest
is the root of a workspace then the workspaces default members are
selected, otherwise only the package defined by the manifest will be
selected.

The default members of a workspace can be set explicitly with the
workspace.default-members key in the root manifest. If this is not
set, a virtual workspace will include all workspace members
(equivalent to passing --workspace), and a non-virtual workspace will
include only the root crate itself.

-p spec<?>, --package spec<?>
Display only the specified packages. See cargo-pkgid(1) for the
SPEC format. This flag may be specified multiple times and
supports common Unix glob patterns like *, ? and []. However, to
avoid your shell accidentally expanding glob patterns before
Cargo handles them, you must use single quotes or double quotes
around each pattern.

--workspace
Display all members in the workspace.

--exclude SPEC<?>
Exclude the specified packages. Must be used in conjunction with
the --workspace flag. This flag may be specified multiple times
and supports common Unix glob patterns like *, ? and []. However,
to avoid your shell accidentally expanding glob patterns before
Cargo handles them, you must use single quotes or double quotes
around each pattern.

Manifest Options

--manifest-path path
Path to the Cargo.toml file. By default, Cargo searches for the
Cargo.toml file in the current directory or any parent directory.

--locked
Asserts that the exact same dependencies and versions are used as
when the existing Cargo.lock file was originally generated. Cargo
will exit with an error when either of the following scenarios
arises:

+o The lock file is missing.

+o Cargo attempted to change the lock file due to a different
dependency resolution.

It may be used in environments where deterministic builds are
desired, such as in CI pipelines.

--offline
Prevents Cargo from accessing the network for any reason. Without
this flag, Cargo will stop with an error if it needs to access
the network and the network is not available. With this flag,
Cargo will attempt to proceed without the network if possible.

Beware that this may result in different dependency resolution
than online mode. Cargo will restrict itself to crates that are
downloaded locally, even if there might be a newer version as
indicated in the local copy of the index. See the cargo-fetch(1)
command to download dependencies before going offline.

May also be specified with the net.offline config value
<https://doc.rust-lang.org/cargo/reference/config.html>.

--frozen
Equivalent to specifying both --locked and --offline.

--lockfile-path PATH
Changes the path of the lockfile from the default
(<workspace_root>/Cargo.lock) to PATH. PATH must end with
Cargo.lock (e.g. --lockfile-path
/tmp/temporary-lockfile/Cargo.lock). Note that providing
--lockfile-path will ignore existing lockfile at the default
path, and instead will either use the lockfile from PATH, or
write a new lockfile into the provided PATH if it doesn't exist.
This flag can be used to run most commands in read-only
directories, writing lockfile into the provided PATH.

This option is only available on the nightly channel
<https://doc.rust-lang.org/book/appendix-07-nightly-rust.html>
and requires the -Z unstable-options flag to enable (see #14421
<https://github.com/rust-lang/cargo/issues/14421>).

Feature Selection

The feature flags allow you to control which features are enabled.
When no feature options are given, the default feature is activated
for every selected package.

See the features documentation
<https://doc.rust-lang.org/cargo/reference/features.html#command-line-feature-options>
for more details.

-F features, --features features
Space or comma separated list of features to activate. Features
of workspace members may be enabled with
package-name/feature-name syntax. This flag may be specified
multiple times, which enables all specified features.

--all-features
Activate all available features of all selected packages.

--no-default-features
Do not activate the default feature of the selected packages.

Display Options

-v, --verbose
Use verbose output. May be specified twice for "very verbose"
output which includes extra output such as dependency warnings
and build script output. May also be specified with the
term.verbose config value
<https://doc.rust-lang.org/cargo/reference/config.html>.

-q, --quiet
Do not print cargo log messages. May also be specified with the
term.quiet config value
<https://doc.rust-lang.org/cargo/reference/config.html>.

--color when
Control when colored output is used. Valid values:

+o auto (default): Automatically detect if color support is
available on the terminal.

+o always: Always display colors.

+o never: Never display colors.

May also be specified with the term.color config value
<https://doc.rust-lang.org/cargo/reference/config.html>.

Common Options

+toolchain
If Cargo has been installed with rustup, and the first argument
to cargo begins with +, it will be interpreted as a rustup
toolchain name (such as +stable or +nightly). See the rustup
documentation <https://rust-lang.github.io/rustup/overrides.html>
for more information about how toolchain overrides work.

--config KEY=VALUE or PATH
Overrides a Cargo configuration value. The argument should be in
TOML syntax of KEY=VALUE, or provided as a path to an extra
configuration file. This flag may be specified multiple times.
See the command-line overrides section
<https://doc.rust-lang.org/cargo/reference/config.html#command-line-overrides>
for more information.

-C PATH
Changes the current working directory before executing any
specified operations. This affects things like where cargo looks
by default for the project manifest (Cargo.toml), as well as the
directories searched for discovering .cargo/config.toml, for
example. This option must appear before the command name, for
example cargo -C path/to/my-project build.

This option is only available on the nightly channel
<https://doc.rust-lang.org/book/appendix-07-nightly-rust.html>
and requires the -Z unstable-options flag to enable (see #10098
<https://github.com/rust-lang/cargo/issues/10098>).

-h, --help
Prints help information.

-Z flag
Unstable (nightly-only) flags to Cargo. Run cargo -Z help for
details.

ENVIRONMENT

See the reference
<https://doc.rust-lang.org/cargo/reference/environment-variables.html>
for details on environment variables that Cargo reads.

EXIT STATUS

+o 0: Cargo succeeded.

+o 101: Cargo failed to complete.

EXAMPLES

1. Display the tree for the package in the current directory:

cargo tree

2. Display all the packages that depend on the syn package:

cargo tree -i syn

3. Show the features enabled on each package:

cargo tree --format "{p} {f}"

4. Show all packages that are built multiple times. This can happen
if multiple semver-incompatible versions appear in the tree (like
1.0.0 and 2.0.0).

cargo tree -d

5. Explain why features are enabled for the syn package:

cargo tree -e features -i syn

The -e features flag is used to show features. The -i flag is
used to invert the graph so that it displays the packages that
depend on syn. An example of what this would display:

syn v1.0.17
|-- syn feature "clone-impls"
| `-- syn feature "default"
| `-- rustversion v1.0.2
| `-- rustversion feature "default"
| `-- myproject v0.1.0 (/myproject)
| `-- myproject feature "default" (command-line)
|-- syn feature "default" (*)
|-- syn feature "derive"
| `-- syn feature "default" (*)
|-- syn feature "full"
| `-- rustversion v1.0.2 (*)
|-- syn feature "parsing"
| `-- syn feature "default" (*)
|-- syn feature "printing"
| `-- syn feature "default" (*)
|-- syn feature "proc-macro"
| `-- syn feature "default" (*)
`-- syn feature "quote"
|-- syn feature "printing" (*)
`-- syn feature "proc-macro" (*)

To read this graph, you can follow the chain for each feature
from the root to see why it is included. For example, the "full"
feature is added by the rustversion crate which is included from
myproject (with the default features), and myproject is the
package selected on the command-line. All of the other syn
features are added by the "default" feature ("quote" is added by
"printing" and "proc-macro", both of which are default features).

If you're having difficulty cross-referencing the de-duplicated
(*) entries, try with the --no-dedupe flag to get the full
output.

SEE ALSO

cargo(1), cargo-metadata(1)

CARGO-TREE(1)