GDALLOCATIONINFO(1) GDAL GDALLOCATIONINFO(1)

NAME

gdallocationinfo - Raster query tool.

SYNOPSIS

Usage: gdallocationinfo [--help] [--help-general]
[-xml] [-lifonly] [-valonly]
[-E] [-field_sep <sep>] [-ignore_extra_input]
[-b <band>]... [-overview <overview_level>]
[-r {nearest|bilinear|cubic|cubicspline}]
[[-l_srs <srs_def>] | [-geoloc] | [-wgs84]]
[-oo <NAME>=<VALUE>]... <srcfile> [<x> <y>]

DESCRIPTION

The gdallocationinfo utility provide a mechanism to query information
about a pixel given its location in one of a variety of coordinate
systems. Several reporting options are provided.

--help Show this help message and exit

--help-general
Gives a brief usage message for the generic GDAL commandline
options and exit.

-xml The output report will be XML formatted for convenient post
processing.

-lifonly
The only output is filenames production from the LocationInfo
request against the database (i.e. for identifying impacted
file from VRT).

-valonly
The only output is the pixel values of the selected pixel on
each of the selected bands. By default, the value of each band
is output on a separate line, unless -field_sep is specified.

-b <band>
Selects a band to query. Multiple bands can be listed. By
default all bands are queried.

-r {nearest|bilinear|cubic|cubicspline}
New in version 3.10.


Select a sampling algorithm. The default is nearest.

The available methods are:

nearest applies a nearest neighbour.

bilinear applies a bilinear convolution kernel.

cubic applies a cubic convolution kernel.

cubicspline applies a B-Spline convolution kernel.

-overview <overview_level>
Query the (overview_level)th overview (overview_level=1 is the
1st overview), instead of the base band. Note that the x,y
location (if the coordinate system is pixel/line) must still
be given with respect to the base band.

-l_srs <srs_def>
The coordinate system of the input x, y location.

-geoloc
Indicates input x,y points are in the georeferencing system of
the image.

-wgs84 Indicates input x,y points are WGS84 long, lat.

-oo <NAME>=<VALUE>
Dataset open option (format specific)

-ignore_extra_input
New in version 3.9.


Set this flag to avoid extra non-numeric content at end of
input lines to be appended to the output lines in -valonly
mode (requires -field_sep to be also defined), or as a
dedicated field in default or -xml modes.

-E New in version 3.9.


Enable Echo mode, where input coordinates are prepended to the
output lines in -valonly mode.

-field_sep <sep>
New in version 3.9.


Defines the field separator, used in -valonly mode, to
separate different values. It defaults to the new-line
character, which means that when querying a raster with
several bands, the output will contain one value per line,
which may make it hard to recognize which value belongs to
which set of input x,y points when several ones are provided.
Defining the field separator is also needed

<srcfile>
The source GDAL raster datasource name.

<x> X location of target pixel. By default the coordinate system
is pixel/line unless -l_srs, -wgs84 or -geoloc supplied.

<y> Y location of target pixel. By default the coordinate system
is pixel/line unless -l_srs, -wgs84 or -geoloc supplied.

This utility is intended to provide a variety of information about a
pixel. Currently it reports:

+o The location of the pixel in pixel/line space.

+o The result of a LocationInfo metadata query against the datasource.
This is implemented for VRT files which will report the file(s)
used to satisfy requests for that pixel, and by the MBTiles driver.

+o The raster pixel value of that pixel for all or a subset of the
bands.

+o The unscaled pixel value if a Scale and/or Offset apply to the
band.

The pixel selected is requested by x/y coordinate on the command
line, or read from stdin. More than one coordinate pair can be
supplied when reading coordinates from stdin. By default integer
pixel/line coordinates are expected. However with use of the
-geoloc, -wgs84, or -l_srs switches it is possible to specify the
location in other coordinate systems.

The default report is in a human readable text format. It is
possible to instead request xml output with the -xml switch.

For scripting purposes, the -valonly and -lifonly switches are
provided to restrict output to the actual pixel values, or the
LocationInfo files identified for the pixel.

It is anticipated that additional reporting capabilities will be
added to gdallocationinfo in the future.

EXAMPLES

Simple example reporting on pixel (256,256) on the file utm.tif.

$ gdallocationinfo utm.tif 256 256
Report:
Location: (256P,256L)
Band 1:
Value: 115

Query a VRT file providing the location in WGS84, and getting the
result in xml.

$ gdallocationinfo -xml -wgs84 utm.vrt -117.5 33.75
<Report pixel="217" line="282">
<BandReport band="1">
<LocationInfo>
<File>utm.tif</File>
</LocationInfo>
<Value>16</Value>
</BandReport>
</Report>

Reading location from stdin.

$ cat coordinates.txt
443020 3748359
441197 3749005
443852 3747743

$ cat coordinates.txt | gdallocationinfo -geoloc utmsmall.tif
Report:
Location: (38P,49L)
Band 1:
Value: 214
Report:
Location: (7P,38L)
Band 1:
Value: 107
Report:
Location: (52P,59L)
Band 1:
Value: 148

$ cat coordinates.txt | gdallocationinfo -geoloc -valonly -E -field_sep , utmsmall.tif
443020,3748359,214
441197,3749005,107
443852,3747743,148

AUTHOR

Frank Warmerdam <warmerdam@pobox.com>

COPYRIGHT

1998-2025

January 8, 2025 GDALLOCATIONINFO(1)