TRAN_BUS_RESET(9E) Driver Entry Points TRAN_BUS_RESET(9E)
tran_bus_reset - reset a SCSI bus
#include <sys/scsi/scsi.h> int prefix
tran_bus_reset(dev_info_t *hba_dip, int level);
illumos DDI
hba_dip
The dev_info_t pointer associated with the SCSI HBA.
level
The level of reset required.
The tran_bus_reset() vector in the scsi_hba_tran(9S) structure
should be initialized during the HBA driver's attach(9E). It is an
HBA entry point to be called when a user initiates a bus reset
through device control interfaces.
tran_bus_reset() must reset the SCSI bus without resetting targets.
level will be one of the following:
RESET_BUS
Reset the SCSI bus only, not the targets.
Implementation is hardware specific. If it is not possible to reset
the SCSI bus without changing the state and operating mode of the
targets, the HBA driver should not initialize this vector or return
failure.
tran_bus_reset() should return:
1
on success.
0
on failure.
See attributes(7) for a description of the following attributes:
+--------------------+-----------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+--------------------+-----------------+
|Interface Stability | Committed |
+--------------------+-----------------+
attributes(7), tran_quiesce(9E), scsi_hba_tran(9S)
March 17, 1999 TRAN_BUS_RESET(9E)
NAME
tran_bus_reset - reset a SCSI bus
SYNOPSIS
#include <sys/scsi/scsi.h> int prefix
tran_bus_reset(dev_info_t *hba_dip, int level);
INTERFACE LEVEL
illumos DDI
PARAMETERS
hba_dip
The dev_info_t pointer associated with the SCSI HBA.
level
The level of reset required.
DESCRIPTION
The tran_bus_reset() vector in the scsi_hba_tran(9S) structure
should be initialized during the HBA driver's attach(9E). It is an
HBA entry point to be called when a user initiates a bus reset
through device control interfaces.
tran_bus_reset() must reset the SCSI bus without resetting targets.
level will be one of the following:
RESET_BUS
Reset the SCSI bus only, not the targets.
Implementation is hardware specific. If it is not possible to reset
the SCSI bus without changing the state and operating mode of the
targets, the HBA driver should not initialize this vector or return
failure.
RETURN VALUES
tran_bus_reset() should return:
1
on success.
0
on failure.
ATTRIBUTES
See attributes(7) for a description of the following attributes:
+--------------------+-----------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+--------------------+-----------------+
|Interface Stability | Committed |
+--------------------+-----------------+
SEE ALSO
attributes(7), tran_quiesce(9E), scsi_hba_tran(9S)
March 17, 1999 TRAN_BUS_RESET(9E)