Tribblix: manual page: ddi_mem_rep

DDI_MEM_REP_PUT8(9F) Kernel Functions for Drivers DDI_MEM_REP_PUT8(9F)

NAME

ddi_mem_rep_put8, ddi_mem_rep_put16, ddi_mem_rep_put32,
ddi_mem_rep_put64, - write multiple data to mapped device in the
memory space or allocated DMA memory

SYNOPSIS

#include <sys/ddi.h>
#include <sys/sunddi.h>

void ddi_mem_rep_put8(ddi_acc_handle_t handle, uint8_t *host_addr,
uint8_t *dev_addr, size_t repcount, uint_t flags);

void ddi_mem_rep_put16(ddi_acc_handle_t handle, uint16_t *host_addr,
uint16_t *dev_addr, size_t repcount, uint_t flags);

void ddi_mem_rep_put32(ddi_acc_handle_t handle, uint32_t *host_addr,
uint32_t *dev_addr, size_t repcount, uint_t flags);

void ddi_mem_rep_put64(ddi_acc_handle_t handle, uint64_t *host_addr,
uint64_t *dev_addr, size_t repcount, uint_t flags);

INTERFACE LEVEL

illumos DDI specific (illumos DDI). The ddi_mem_rep_put8(),
ddi_mem_rep_put16(), ddi_mem_rep_put32(), and ddi_mem_rep_put64()
functions are obsolete. The ddi_rep_put8(9F) function replaces
ddi_mem_rep_put8(). The ddi_rep_put16(9F) function replaces
ddi_mem_rep_put16(). The ddi_rep_put32(9F) function replaces
ddi_mem_rep_put32(). The ddi_rep_put64(9F) function replaces
ddi_mem_rep_put64().

PARAMETERS

handle
The data access handle returned from setup calls, such
as ddi_regs_map_setup(9F).

host_addr
Base host address.

dev_addr
Base device address.

repcount
Number of data accesses to perform.

flags
Device address flags:

DDI_DEV_AUTOINCR
Automatically increment the
device address, dev_addr, during
data accesses.

DDI_DEV_NO_AUTOINCR
Do not advance the device
address, dev_addr, during data
accesses.

DESCRIPTION

These routines generate multiple writes to memory space or allocated
DMA memory. repcount data is copied from the host address, host_addr,
to the device address, dev_addr, in memory space. For each input
datum, the ddi_mem_rep_put8(), ddi_mem_rep_put16(),
ddi_mem_rep_put32(), and ddi_mem_rep_put64() functions write 8 bits,
16 bits, 32 bits and 64 bits of data, respectively, to the device
address. dev_addr and host_addr must be aligned to the datum boundary
described by the function.

Each individual datum will automatically be translated to maintain a
consistent view between the host and the device based on the encoded
information in the data access handle. The translation may involve
byte-swapping if the host and the device have incompatible endian
characteristics.

When the flags argument is set to DDI_DEV_AUTOINCR, these functions
will treat the device address, dev_addr, as a memory buffer location
on the device and increments its address on the next input datum.
However, when the flags argument is set to DDI_DEV_NO_AUTOINCR, the
same device address will be used for every datum access. For example,
this flag may be useful when writing from a data register.

CONTEXT

These functions can be called from user, kernel, or interrupt
context.

ATTRIBUTES