MR_SAS(4D) Devices MR_SAS(4D)
NAME
mr_sas - LSI MegaRAID SAS2.0 Controller HBA driver
DESCRIPTION
The
mr_sas MegaRAID SAS2.0 controller host bus adapter driver is a
SCSA-compliant nexus driver that supports the LSI MegaRAID SAS 92
xx series of controllers and the Sun StorageTek 6Gb/s SAS RAID HBA
series of controllers.
Some of the RAID Features include the following:
o RAID levels 0, 1, 5, and 6
o RAID spans 10, 50, and 60
o Online Capacity Expansion (OCE)
o Online RAID Level Migration (RLM)
o Auto resume after loss of system power during arrays array
rebuild or reconstruction (RLM)
o Configurable stripe size up to 1MB
o Check Consistency for background data integrity
o Patrol read for media scanning and repairing
o 64 logical drive support
o Up to 64TB LUN support
o Automatic rebuild
o Global and dedicated Hot Spare support
Configuration
The
mr_sas.conf file contains one user configurable parameter, for
MSI or MSI-X support. Configure your hardware through the related
BIOS utility or the MegaCli Configuration Utility. If you want to
install to a drive attached to a
mr_sas HBA, create the virtual drive
first from the BIOS (X86) before running Solaris install. The
MegaCli utility can be downloaded from the LSI website.
The LSI MegaRAID SAS device can support up to 64 virtual SAS2.0,
SAS1.0, SATA3.0, or SATA 6.0 disks. The BIOS numbers the virtual
disks as 1 through 64, however in Solaris these drives are numbered
from 0 to 63. Also keep in mind that SAS and SATA drives can not be
configured into the same virtual disk.
FILES
/kernel/drv/mr_sas 32-bit x86 ELF kernel module
/kernel/drv/amd64/mr_sas 64-bit kernel module x86 ELF kernel
module
/kernel/drv/sparcv9/mr_sas 64-bit SPARC ELF kernel module
/kernel/drv/mr_sas.conf Driver configuration file containing
one user-configurable option
ATTRIBUTES
See
attributes(7) for a description of the following attributes:
+--------------------+-----------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+--------------------+-----------------+
|Architecture | SPARC, x86 |
+--------------------+-----------------+
|Interface Stability | Uncommitted |
+--------------------+-----------------+
SEE ALSO
sata(4D),
attributes(7),
prtconf(8),
scsi_hba_attach_setup(9F),
scsi_sync_pkt(9F),
scsi_transport(9F),
scsi_device(9S),
scsi_inquiry(9S),
scsi_pkt(9S) Small Computer System Interface-2 (SCSI-2)NOTES
The
mr_sas driver only supports internal and external expanders that
are not fully SAS1.0 or fully SAS2.0 compliant.
May 28, 2009 MR_SAS(4D)
